dmesg - ASUS NVIDIA GeForce GTX 765M
Linux version 4.5.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006db07fff] usable
BIOS-e820: [mem 0x000000006db08000-0x000000006db0efff] ACPI NVS
BIOS-e820: [mem 0x000000006db0f000-0x000000006e353fff] usable
BIOS-e820: [mem 0x000000006e354000-0x000000006e5d1fff] reserved
BIOS-e820: [mem 0x000000006e5d2000-0x000000007d922fff] usable
BIOS-e820: [mem 0x000000007d923000-0x000000007db2afff] reserved
BIOS-e820: [mem 0x000000007db2b000-0x000000007de73fff] usable
BIOS-e820: [mem 0x000000007de74000-0x000000007eb4efff] ACPI NVS
BIOS-e820: [mem 0x000000007eb4f000-0x000000007ef4afff] reserved
BIOS-e820: [mem 0x000000007ef4b000-0x000000007effefff] type 20
BIOS-e820: [mem 0x000000007efff000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047f3fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0x7eb17000 ACPI=0x7eb17000 SMBIOS=0xf04c0 MPS=0xfd590
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. G750JW/G750JW, BIOS G750JW.210 12/11/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x47f400 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7F80000000 write-back
2 base 0080000000 mask 7F80000000 uncachable
3 base 007FC00000 mask 7FFFC00000 uncachable
4 base 047F800000 mask 7FFF800000 uncachable
5 base 047F400000 mask 7FFFC00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0x7fc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x02133000, 0x02133fff] PGTABLE
BRK [0x02134000, 0x02134fff] PGTABLE
BRK [0x02135000, 0x02135fff] PGTABLE
BRK [0x02136000, 0x02136fff] PGTABLE
BRK [0x02137000, 0x02137fff] PGTABLE
BRK [0x02138000, 0x02138fff] PGTABLE
RAMDISK: [mem 0x35f5a000-0x36fa4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007EB17000 000024 (v02 _ASUS_)
ACPI: XSDT 0x000000007EB17080 000084 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FACP 0x000000007EB2A6A8 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: DSDT 0x000000007EB17228 01347C (v02 _ASUS_ Notebook 00000012 INTL 20120711)
ACPI: FACS 0x000000007EB4C080 000040
ACPI: APIC 0x000000007EB2A7B8 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: FPDT 0x000000007EB2A850 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: ECDT 0x000000007EB2A898 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x000000007EB2A960 00019D (v01 Intel zpodd 00001000 INTL 20120711)
ACPI: SSDT 0x000000007EB2AB00 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x000000007EB2B040 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: MCFG 0x000000007EB2BB18 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: HPET 0x000000007EB2BB58 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x000000007EB2BB90 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x000000007EB2BE28 005D15 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 0x000000007EB31B40 000080 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047f3fffff]
NODE_DATA(0) allocated [mem 0x47f3f5000-0x47f3f9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047f3fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000006db07fff]
node 0: [mem 0x000000006db0f000-0x000000006e353fff]
node 0: [mem 0x000000006e5d2000-0x000000007d922fff]
node 0: [mem 0x000000007db2b000-0x000000007de73fff]
node 0: [mem 0x000000007efff000-0x000000007effffff]
node 0: [mem 0x0000000100000000-0x000000047f3fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047f3fffff]
On node 0 totalpages: 4181381
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7976 pages used for memmap
DMA32 zone: 510440 pages, LIFO batch:31
Normal zone: 57296 pages used for memmap
Normal zone: 3666944 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6db08000-0x6db0efff]
PM: Registered nosave memory: [mem 0x6e354000-0x6e5d1fff]
PM: Registered nosave memory: [mem 0x7d923000-0x7db2afff]
PM: Registered nosave memory: [mem 0x7de74000-0x7eb4efff]
PM: Registered nosave memory: [mem 0x7eb4f000-0x7ef4afff]
PM: Registered nosave memory: [mem 0x7ef4b000-0x7effefff]
PM: Registered nosave memory: [mem 0x7f000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 32 pages/cpu @ffff88047f000000 s93144 r8192 d29736 u262144
pcpu-alloc: s93144 r8192 d29736 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4116019
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16170668K/16725524K available (5869K kernel code, 1096K rwdata, 2928K rodata, 1316K init, 824K bss, 554856K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.601 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.20 BogoMIPS (lpj=9578404)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Disabling memory control group subsystem
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81c5d000 - ffffffff81c63000)
ftrace: allocating 24051 entries in 94 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x0000007dab2000 end: 0x0000007dabefff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38313.61 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6db08000-0x6db0efff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0x7de74000-0x7eb4efff] (13479936 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 2 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88046C1B0C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88046E4A4800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88046C0E1400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7fc00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xed600000-0xed60ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xed61a000-0xed61a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xed618000-0xed6183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xed610000-0xed613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xed617000-0xed6173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xed616000-0xed6167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xed615000-0xed6150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:11e2] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xed080000-0xed083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [14e4:43b1] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xed400000-0xed407fff 64bit]
pci 0000:03:00.0: reg 0x18: [mem 0xed200000-0xed3fffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xed200000-0xed4fffff]
pci 0000:04:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xed500000-0xed53ffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xed500000-0xed5fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xebffffff]
pci 0000:00:1c.4: bridge window [mem 0x90000000-0xbfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6db08000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e354000-0x6fffffff]
e820: reserve RAM buffer [mem 0x7d923000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7de74000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x47f400000-0x47fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0240-0x0259] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs ETD010d SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xeffdf000-0xeffdffff] has been reserved
system 00:08: [mem 0xeffe0000-0xeffeffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 05-3d] add_size 1000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x7fc00000-0x7fdfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x7fe00000-0x7fffffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xec000000-0xed0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x7fc00000-0x7fdfffff]
pci 0000:00:1c.0: bridge window [mem 0x7fe00000-0x7fffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xed200000-0xed4fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xed500000-0xed5fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-3d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xebffffff]
pci 0000:00:1c.4: bridge window [mem 0x90000000-0xbfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x7fc00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x7fc00000-0x7fdfffff]
pci_bus 0000:02: resource 2 [mem 0x7fe00000-0x7fffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xed200000-0xed4fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xed500000-0xed5fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xd4000000-0xebffffff]
pci_bus 0000:05: resource 2 [mem 0x90000000-0xbfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 16684K (ffff880035f5a000 - ffff880036fa5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x69b08000-0x6db08000] (64MB) mapped at [ffff880069b08000-ffff88006db07fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
simple-framebuffer simple-framebuffer.0: framebuffer at 0xd1000000, 0x1d5000 bytes, mapped to 0xffffc90001c00000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
Console: switching to colour frame buffer device 100x37
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1460757645.396:1): initialized
Initialise system trusted keyring
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x12
microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x12
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
zswap: loaded using pool lzo/zbud
rtc_cmos 00:02: setting system clock to 2016-04-15 22:00:46 UTC (1460757646)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1316K (ffffffff81b14000 - ffffffff81c5d000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 264K (ffff8800019be000 - ffff880001a00000)
Freeing unused kernel memory: 1168K (ffff880001cdc000 - ffff880001e00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
random: systemd-udevd urandom read with 3 bits of entropy available
fjes: module verification failed: signature and/or required key missing - tainting kernel
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (67 C)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:11:22:33:44:55]
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xed618000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xed617000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.5.0-1-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.5.0-1-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xed616000 port 0xed616100 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xed616000 port 0xed616200 irq 27
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xed616000 port 0xed616300 irq 27
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-2: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-2: New USB device found, idVendor=0458, idProduct=0143
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: X-G500
usb 3-2: Manufacturer: Genius
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius X-G500 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0458:0143.0001/input/input9
hid-generic 0003:0458:0143.0001: input,hidraw0: USB HID v1.10 Keyboard [Genius X-G500] on usb-0000:00:14.0-2/input0
input: Genius X-G500 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:0458:0143.0002/input/input10
usb 3-5: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:0458:0143.0002: input,hidraw1: USB HID v1.10 Mouse [Genius X-G500] on usb-0000:00:14.0-2/input1
hid-generic 0003:0458:0143.0003: hiddev0,hidraw2: USB HID v1.10 Device [Genius X-G500] on usb-0000:00:14.0-2/input2
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x360f00)
ata3.00: ATAPI: Slimtype DVD A DS8A9SH, EAA2, max UDMA/100
ata3.00: configured for UDMA/100
usb 3-5: New USB device found, idVendor=13d3, idProduct=3404
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-5: Product: BCM20702A0
usb 3-5: Manufacturer: Broadcom Corp
usb 3-5: SerialNumber: 240A6439993E
scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8A9SH EAA2 PQ: 0 ANSI: 5
psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x16, 0x0c.
psmouse serio4: elantech: Elan sample query result 03, 5a, 64
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
usb 3-7: new high-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 2394.442 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283b520906, max_idle_ns: 440795282364 ns
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-8: ADATA SX900, 5.0.7a, max UDMA/133
ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ADATA SX900 7a PQ: 0 ANSI: 5
usb 3-7: New USB device found, idVendor=13d3, idProduct=5188
usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-7: Product: USB2.0 UVC HD Webcam
usb 3-7: Manufacturer: Azurewave
usb 3-7: SerialNumber: NULL
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11
sd 4:0:0:0: [sdb] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:21 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/etc/systemd/system/plexmediaserver.service:14] Invalid escape sequences in line, correcting: "/bin/sh -c '/usr/lib/plexmediaserver/Plex\ Media\ Server'"
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (sdb4): re-mounted. Opts: errors=remount-ro
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Key type encrypted registered
[drm] Initialized drm 1.1.0 20060810
systemd[1]: Started Journal Service.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.79 Wed Jan 13 16:17:53 PST 2016
systemd-journald[235]: Received request to flush runtime journal from PID 1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
ACPI: Power Button [PWRF]
input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input14
ACPI: AC Adapter [AC0] (on-line)
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
EDAC ie31200: No ECC support
sr 2:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\SMB0) (20160108/utaddress-255)
ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
random: nonblocking pool is initialized
ACPI: Battery Slot [BAT0] (battery present)
input: PC Speaker as /devices/platform/pcspkr/input/input15
EFI Variables Facility v0.08 2004-May-17
media: Linux media interface: v0.10
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Linux video capture interface: v2.00
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pstore: Registered efi as persistent store backend
acpi device:66: registered as cooling_device8
usbcore: registered new interface driver btusb
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
Bluetooth: hci0: BCM: chip id 63
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3229: line_outs=2 (0x17/0x14/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Adding 4198396k swap on /dev/sdb5. Priority:-1 extents:1 across:4198396k SSFS
Bluetooth: hci0: Linuxito
Bluetooth: hci0: BCM20702A1 (001.002.014) build 1479
bluetooth hci0: firmware: failed to load brcm/BCM20702A1-13d3-3404.hcd (-2)
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-13d3-3404.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-13d3-3404.hcd not found
uvcvideo 3-7:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 3-7:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized!
input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
acpi device:69: registered as cooling_device10
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:63/LNXVIDEO:00/input/input19
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a0877
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
asus_wmi: Number of fans: 1
FAT-fs (sdb9): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2394432461 Hz
vboxdrv: Successfully loaded version 5.0.16_Debian (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ACPI Warning: \_SB.PCI0.PEG0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160108/nsarguments-95)
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nvidia_uvm: Loaded the UVM driver, major device number 247
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU2: Core temperature/speed normal
CPU6: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU2: Core temperature above threshold, cpu clock throttled (total events = 59618)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 59618)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 91911)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 91911)
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU2: Package temperature above threshold, cpu clock throttled (total events = 91911)
mce: [Hardware Error]: Machine check events logged
CPU2: Core temperature/speed normal
CPU4: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU6: Core temperature/speed normal
CPU7: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb 4-4: Disable of device-initiated U1 failed.
usb 4-4: USB disconnect, device number 2
usb 4-4: Disable of device-initiated U2 failed.
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host7: usb-storage 4-4:1.0
usb 4-4: USB disconnect, device number 3
usb 4-4: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host8: usb-storage 4-4:1.0
scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdc] Spinning up disk...
.
sd 8:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 4
usb 4-4: new SuperSpeed USB device number 5 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host9: usb-storage 4-4:1.0
scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] Spinning up disk...
.
sd 9:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 5
usb 4-4: new SuperSpeed USB device number 6 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host10: usb-storage 4-4:1.0
scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg3 type 0
sd 10:0:0:0: [sdc] Spinning up disk...
.
sd 10:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 6
usb 4-4: new SuperSpeed USB device number 7 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host11: usb-storage 4-4:1.0
scsi 11:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdc] Spinning up disk...
.
sd 11:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 7
usb 4-4: new SuperSpeed USB device number 8 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host12: usb-storage 4-4:1.0
scsi 12:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 12:0:0:0: Attached scsi generic sg3 type 0
sd 12:0:0:0: [sdc] Spinning up disk...
.
sd 12:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 8
usb 4-4: new SuperSpeed USB device number 9 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host13: usb-storage 4-4:1.0
scsi 13:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdc] Spinning up disk...
.
sd 13:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 9
usb 4-4: new SuperSpeed USB device number 10 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host14: usb-storage 4-4:1.0
scsi 14:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 14:0:0:0: Attached scsi generic sg3 type 0
sd 14:0:0:0: [sdc] Spinning up disk...
.
sd 14:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 10
usb 4-4: new SuperSpeed USB device number 11 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host15: usb-storage 4-4:1.0
scsi 15:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 15:0:0:0: Attached scsi generic sg3 type 0
sd 15:0:0:0: [sdc] Spinning up disk...
.
sd 15:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: USB disconnect, device number 11
usb 4-4: new SuperSpeed USB device number 12 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host16: usb-storage 4-4:1.0
scsi 16:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 16:0:0:0: Attached scsi generic sg3 type 0
sd 16:0:0:0: [sdc] Spinning up disk...
usb 4-4: USB disconnect, device number 12
.ready
sd 16:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 16:0:0:0: [sdc] Sense not available.
sd 16:0:0:0: [sdc] Write Protect is off
sd 16:0:0:0: [sdc] Mode Sense: 00 06 04 5e
sd 16:0:0:0: [sdc] Asking for cache data failed
sd 16:0:0:0: [sdc] Assuming drive cache: write through
sd 16:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 16:0:0:0: [sdc] Sense not available.
sd 16:0:0:0: [sdc] Attached SCSI removable disk
usb 4-4: new SuperSpeed USB device number 13 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host17: usb-storage 4-4:1.0
usb 4-4: USB disconnect, device number 13
usb 4-4: new SuperSpeed USB device number 14 using xhci_hcd
usb 4-4: New USB device found, idVendor=05e3, idProduct=0747
usb 4-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 4-4: Product: USB Storage
usb 4-4: Manufacturer: Generic
usb 4-4: SerialNumber: 000000000819
usb-storage 4-4:1.0: USB Mass Storage device detected
scsi host18: usb-storage 4-4:1.0
scsi 18:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
sd 18:0:0:0: Attached scsi generic sg3 type 0
sd 18:0:0:0: [sdc] Spinning up disk...
.
sd 18:0:0:0: [sdc] Attached SCSI removable disk